As most of you know. I’m moving to Auckland, New Zealand. I leave in under 3 weeks. I’ll be there for 2 years with my girlfriend Erin. I want to say a few things before I go: I built this site hoping it would bring together people with similar interests It’s been a lot of […]
So I picked up the Norton engine today!! Im totally stoked to get it all back together, but I was hoping to maybe get an extra pair of hands on Tuesday afternoon to help out. Let me know if any of you are available. The barrels were honed, bead blasted, primed and painted. The head […]
Just to recap, our buddy Peter rode his BMW to Cali and back over the past 2 months. Read his caption below. “On October 2nd I left Harrisburg, PA to start the first day of my cross-country journey. November 22nd saw me leave Atlanta, GA and arrive safely back in the Keystone state 800 miles […]
cycle: 1974 cb200 ripper: dana
get ready get juiced get the job done
Mick Wawa pit stop The Guzzi looking good as always Sunset on the Chesapeake Riding twisties
Karl was a longtime Philadelphia area vintage motorcycle rider that frequented Two Wheel Tuesday from time to time. Some of you may have met him or saw him in his wheelchair last year at the Norton Gathering in Washington Crossing State Park. The photo above is of the gravestone Karl had pre-ordered the beginning of […]
This isn’t a real poll, just comment and let me know which you like better. So when I move to NZ I’ll be getting a cycle right when I get there. They have a bunch of stuff you can’t get in the USA. Including these 2 cycles from the japanese Honda market: – nsr250 (2 […]
Ahhh!! a runaway prisoner and a cowboy breakin’ the law!
I waxed the S2000, dialed it in, and got it ready for storage today. I decided when I get back from NZ, I’m gonna start getting into amateur road racing. Watch this vid. It’s sick as shit. It’s exactly why I always wanted an S2000.
Braving some cold nighttime temperatures we headed past the the Jersey strip malls, through some wildman drivers, and deep down a sandy path into the Pine Barons of Jersey for one last camping trip…. Todd warming up before heading back out at night.. Ed and Adam avoid some jersey devil mudpits. Molotov cocktails The path […]
My cb360 has been a blast, but since i’ve been doing more highway then I ever thought I would, I decided I should get a bigger bike. I settled on getting a cb500 four or cb550 four. I started looking month ago for a project bike but was having no luck but I finally found […]
While I’m trying to sort out getting the engine bolts, I removed the starter and all its components which requires pulling the rotor. As with my 500t, I had to use the gear puller with the impact wrench to blow it off so I can get the starter gear off thats behind the rotor. Real […]
I don’t know much about this engine and that’s turning out to be an issue. I cleaned up the cylinder head cover and then realized I don’t have the bolts to put it on which means, i can’t check compression. I’m hesitant to do more work on it without knowing the compression. Anyone have the cylinder […]
Look something like this. View the images of what went down this past Thursday.
Cleaned up the wheels. Inside the rims was rusted pretty bad but they cleaned up nicely with a wire brush. I got out of work late tonight but was still able to make it down to the UPS store on Oregon before it closed to pick these up. FRESH RUBBER! Duro HF318 400/18 Got them […]
A few of us did a small camping trip down to Elk Neck Sate Park last weekend, had a great time. Scott led us on some great back roads leaving Philly, down through Delaware, and then over to the Chesapeake Bay area. Some great twists, mixed in with some tremendous wind gusts to keep us […]
So, I recently finished my Honda 919 build, and have been in the market for another project. I’d like to get into building bikes for a living, so I’ve been cutting my teeth on Honda’s for the last few years – just trying to get the hang of non-bolt on customization and all that that […]
Random
Blast
From Past
Published - Jun 2, 2016
Stickers are selling quick so grab one while they last. If you’re local and want to stop by and to pick one up send me an email at castandsalvage@gmail.com Die cut vinyl sticker 6″ x 1.75″ $5 each with free shipping. Every purchase helps support COTT and Cast & Salvage!
